Im Verifikationsbeispiel wird die Windlastberechnung an einem Flachdachgebäude unter Verwendung der Norm EN 1991-1-4 mit der CFD-Simulation aus RWIND Simulation verglichen. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
This verification example compares wind load calculations on a flat roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. Das Gebäude wird anhand der Skizze und des in der Norm ASCE 7-16 enthaltenen Anströmgeschwindigkeitsprofils definiert.
This verification example compares wind load calculations on a duopitch roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. Das Gebäude wird anhand der Skizze und des in der Norm ASCE 7-16 enthaltenen Anströmgeschwindigkeitsprofils definiert.
Im Verifikationsbeispiel wird die Windlastberechnung an einem Gebäude mit Satteldach unter Verwendung der Norm EN 1991-1-4 mit der CFD-Simulation in RWIND Simulation verglichen. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Das Verifikationsbeispiel beschreibt die stationäre Umströmung an einem isolierten Gebäude (skaliertes Modell) am Beispiel von Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Das vorliegende Verifikationsbeispiel beschreibt Druckbelastungen an den Wänden von Gebäuden in Tandemanordnung, die sich in Bodennähe befinden. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Das Verifikationsbeispiel beschreibt Windlasten aus mehreren Anströmrichtungen am Modell einer Gebäudegruppe. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Dieses Verifikationsbeispiel basiert auf dem Verifikationsbeispiel 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Ein Einmassensystem mit Lochspiel und zwei Federn wird zunächst einer Durchbiegung ausgesetzt. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Ein gedämpftes Einmassensystem ist einer konstanten Lastkraft ausgesetzt. Determine the deflection and velocity of the dashpot endpoint in the given test time.
An beiden Enden ist ein dreidimensionaler Block aus elastisch-plastischem Material mit Verfestigung befestigt. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Bestimmen Sie die maximale Durchbiegung eines an beiden Enden befestigten dreidimensionalen Blocks. Der Block wird in der Mitte geteilt: Die obere Hälfte besteht aus einem elastischen Material und der untere Teil aus Holz - einem elasto-plastischen othotropen Material mit der nach der Plastizitätstheorie von Tsai -Wu beschriebenen Fließfläche. Die Mittelebene des Blocks wird einem vertikalen Druck augesetzt.
Ein 3D-Block aus einem elastisch-plastischen Material wird an beiden Enden befestigt. Die Mittelebene des Blocks wird druckbelastet. Die Plastizität der Fläche wird nach der Tsai-Wu-Plastizitätstheorie geregelt.
Bestimmen Sie die maximale Durchbiegung von vier unten befestigten Stützen, die oben durch einen starren Block verbunden sind. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Vier Stützen sind unten fixiert und oben durch einen starren Block verbunden. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Das Architectural Institute of Japan (AIJ) hat eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den "Case E - a building complex in an actual urban area with dense concentration of low-rise buildings in Niigata City". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
Das Architectural Institute of Japan (AIJ) hat eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den "Case D - high-rise building among city blocks". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.